Chongqing Blossom Machinery Equipment Co., Ltd
ProductsCurrent location :Home > Products > Lube Oil /Grease Testers
Lube Oil Foaming Characteristics Tester BLS-892
【Brief】:The instrument complies to ASTM D892, IP145 and GB/T 12579.
【Series】:Lube Oil /Grease Testers

Application

The instrument is designed and manufactured according to ASTM D892, IP145 and the requirements of the People's Republic of China standard GB/T 12579 Lubricating Oil Foam Properties Determination Method. It is suitable to determine the foam properties of lubricating oil  and measure the foaming tendency of the lube oil and the stability of the foam.


Features

1.Adopts integrated structure, including three parts: the low temperature constant temperature part and its control part, and the high temperature constant temperature part and its control part. The low temperature constant temperature part is equipped with portable cooler.

2. After the constant temperature point has been set, the instrument will enter into constant temperature state automatically. The temperature controller is equipped with parameter correction function. If the displayed temperature deviates from the temperature measured by the thermometer, the required temperature can be achieved through correction.

3. The instrument has automatic timing and alarm function. When turn on the timing switch after reaches the constant temperature point, the timer will automatically time and start to blow at the same time. 5 minutes later,the air will be automatically turned off and kept static for 10 minutes. 10 minutes later, the instrument will alarm automatically to indicate that the current sample test is over.


Technical Parameters

Working power

AC (220 ± 10%) V, 50Hz(can be customized)

Constant temperature heating power

650W

Auxiliary heating power

1000W

Cooling power

 500W

Air flow

 (94 ± 5) ml / min, adjustable

Temperature control range

Room temperature-99.9(high temperature bath)

Temperature control accuracy

 ± 0.5

Timer

5 minutes and 10 minutes,accurate to the second

Timing accuracy

0.01% + 0.05s (at 20)

Ambient temperature

-10 to 40

Relative humidity

85%

Total power consumption

2700W

Outer dimensions

690×460×700mm(L×W×H)

Cooler dimensions

400×450×300mm(L×W×H)


 

 

Related Products
Pre:Lube Oil Oxidation Stability Tester (Rotary Oxygen Bomb Method) BLS-2272
Next:Petroleum Products Ash Content Tester BLS-482
Online Service
QR Code